Tru Virtu Click & Slide Coin Pocket Wallet Diagonal Carbon RFID-blocking Wallet for cards and coins from Watchesonline
Tru Virtu Click & Slide Coin Pocket Wallet Diagonal Carbon RFID-blocking Wallet is made of textured black leather. Tru Virtu Click & Slide RFID wallets use the innovative and patented "Click & Slide" technology. With the push of a thumb, your cards pop out of the aluminium case in a staggered manner and you can conveniently pick the right card. The aluminium case also protects your cards from remote reading. The wallet is wrapped in Italian leather, which opens into a bill and card pocket at the touch of a button, so you can carry your notes and receipts with you. The wallet is 99 x 67 x 27 mm in size. The aluminium case holds 5 cards and the opening leather pocket holds 7 more.
We can engrave, free of charge, initials or a date (max. 20 characters) on the cover of the aluminium case. First choose engraving and the text style to be used for the engraving and enter the information to be engraved in the "text to be engraved" field. Please note that Engraved wallets are non-returnable.
Help for using your wallet:
How do I insert cards into my Click & Slide wallet? Stack 3-5 cards and push them into the case as a single pack until you hear a click. Do not force the cards in at an angle or force them in.
What is the right number of cards for a Click & Slide wallet? The case works best with 4-5 cards, up to 4 of which can be embossed. A larger number may cause the cards to jam. If this happens, see section 5. Also, the case should not hold less than 3 cards. Single cards are more likely to fall off the board.
How do I get the cards to stay in the Click & Slide wallet? Once the cards are inserted and you hear a click, push the button on the side of the case upwards to lock them in place. Now the cards should not fall out when you turn the case upside down. Please note that shaking is not normal use of the wallet! Click & Slide is designed only for plastic cards that meet the ISO/IEC 7810 standard ID-1. Clearly worn, bent or metallic cards should not be used inside either.
How do I retrieve cards from my Click & Slide wallet? Press the button on the side of the case downwards with your thumb and the cards will pop up in a convenient tiered formation.
What do I do if my cards get stuck in the Click & Slide wallet? While holding down the button on the side of the case, tap the edge of the wallet a few times, for example against a table. When the cards appear slightly, you can pull them out normally. You can also try to slip a piece of tape between the two cards and pull them out this way.
Why do my cards slide out of the Click & Slide wallet only a few millimetres? At the beginning of use, the rubber seal on the case may put too much resistance on the cards. To speed up the loosening of the rubber, push the button on the side of the case until the cards come out. Then pull the cards by hand about halfway and press them crosswise against the edge of the button a few times. Now the cards should rise up out of the case. The mechanism will also give way with time.
Where do I place my cards in the Click & Slide wallet? If you want to keep one of your cards remote readable, you can store it in the middle pocket of the leather case. This way you don't have to take the card out of the wallet when you use it.
Note! In addition to the seal, the button on the case may also be a little stiff in a brand new wallet. This is perfectly normal and the wallet will become more sluggish very soon after use.
